The pilot of the ill-fated Pakistan International Airline (PIA) plane that crashed a couple of days ago had ignored warnings from air traffic control about the plane’s height and speed as the aircraft approached for landing.
The PK-8303 tragedy has become the third most-catastrophic aviation disaster in Pakistan’s history.
The plane crashed into a narrow residential street in Karachi on Friday, dealing significant damage to houses in a densely-populated area.
Of the 99 people aboard, 97 were killed.
According to a report from air traffic control, the flight left the Lahore airport at 1.05pm and was scheduled to land at the Jinnah International Airport in Karachi at 2.30pm.
The report said the plane had enough fuel in it to fly for two hours and 34 minutes, while its total flying time was recorded at one hour and 33 minutes.
At 2.30pm, the plane was 15 nautical miles from Karachi at Makli, flying at an altitude of 10,000 feet above the ground, instead of 7,000 feet when air traffic control issued its first warning to the pilot to lower the plane’s altitude.
Instead of lowering the plane’s altitude, the pilot responded by saying that he was satisfied.
When only 10 nautical miles were left to the Karachi airport, the plane was at an altitude of 7,000 feet instead of 3,000 feet.
The report states that air traffic control issued a second warning to the pilot to lower the aircraft’s altitude.
However, the pilot responded again by stating that he was satisfied and would handle the situation, adding that he was ready for landing.
According to an earlier report, prepared by the Pakistan Civil Aviation Authority (PCAA), the plane’s engines had scraped the runway thrice on the pilot’s first attempt to land the plane, causing friction and sparks.
Three long marks have been observed and recorded by the PCAA’s experts on the runway.
Sources in the PCAA had said that the plane’s engines first made contact with the ground at the 4,500-feet marker, followed a second time at the 5,500-feet marker, and a third time at the 7,000-feet marker.
After the third impact, the pilot took the aircraft off into the air again, which officials found very strange as the cockpit did not inform air traffic control of any problem with the landing gear, when it was already clear that it was the reason why it could not land properly.
There was no indication from the pilot or his first officer to air traffic control that something was wrong with the plane.
Experts are of the view that when the engines scraped the ground on the first failed attempt at landing, the engine’s oil tank and fuel pump may have been damaged.
The engine’s oil may have started to leak, which would have prevented the pilot from achieving the required thrust and speed to raise the aircraft to safety.
According to sources at air traffic control as well as the PCAA, the pilot made a decision “on his own” to undertake a “go-around” after he failed to land the first time.
It was only during the go-around that air traffic control was informed that landing gear was not deploying.
The pilot was then directed by the air traffic controller to take the aircraft to 3,000 feet, but he managed only 1,800.
When the pilot was reminded to go for the 3,000 feet level, the first officer responded saying: “We are trying.”
Experts said that this failure of the aircraft to achieve the directed height indicates that the engines were not responding.
While approaching the runway from Malir, designated 25L, for the second attempt, the pilots also took a short distance of 1.5 nautical miles instead of the mandatory seven nautical miles defined for such a large-sized plane.
The aircraft’s failure to approach from the mandatory height and distance again suggests that the engines did not provide enough thrust and speed to do both functions.
The aircraft thereafter tilted and crashed suddenly.
“The plane descended too fast, almost plunged,” sources familiar with the report said.
Related Story